Multi-Gigabit Wireless data transfer at 60 GHz

In this paper we describe the status of the first prototype of the 60 GHz wireless Multi-gigabit data transfer topology currently under development at University of Heidelberg using IBM 130 nm SiGe HBT BiCMOS technology. The 60 GHz band is very suitable for high data rate and short distance applications as for example needed in the HEP experments. The wireless transceiver consist of a transmitter and a receiver. The transmitter includes an On-Off Keying (OOK) modulator, an Local Oscillator (LO), a Power Amplifier (PA) and a BandPass Filter (BPF). The receiver part is composed of a BandPass- Filter (BPF), a Low Noise Amplifier (LNA), a double balanced down-convert Gilbert mixer, a Local Oscillator (LO), then a BPF to remove the mixer introduced noise, an Intermediate Amplifier (IF), an On-Off Keying demodulator and a limiting amplifier. The first prototype would be able to handle a data-rate of about 3.5 Gbps over a link distance of 1 m. The first simulations of the LNA show that a Noise Figure (NF) of 5 dB, a power gain of 21 dB at 60 GHz with a 3 dB bandwidth of more than 20 GHz with a power consumption 11 mW are achieved. Simulations of the PA show an output referred compression point P1dB of 19.7 dB at 60 GHz.Comment: Proceedings of the WIT201

El aire: hábitat y medio de transmisión de microorganismos

La atmósfera no tiene una microbiota autóctona pero es un medio para la dispersión de muchos tipos de microorganismos (esporas, bacterias, virus y hongos), procedentes de otros ambientes. Algunos han creado adaptaciones especializadas que favorecen su supervivencia y permanencia. Los microorganismos dispersados por el aire tiene una gran importancia biológica y económica. Producen enfermedades en plantas, animales y humanos, causan alteración de alimentos y materiales orgánicos y contribuyen al deterioro y corrosión de monumentos y metales. La Microbiología del aire comienza en el siglo XIX, con Pasteur y Miquel que diseñaron métodos para estudiar los microorganismos en el aire y descubrir la causa de algunas enfermedades. Desde entonces numerosos investigadores han trabajado en este campo tanto en el aire exterior como en recintos cerrados. Las enfermedades transmitidas por el aire, producidas por bacterias, virus y hongos, son las respiratorias (neumonía, tosferina, tuberculosis, legionelosis, resfriado, gripe), sistémicas (meningitis, sarampión, varicela, micosis) y alérgicas

Tenemos cita con el arte: a pilot project of visits and workshops with people affected by Alzheimer's disease in the Prado Museum, the Centro de Arte Reina Sofía Museum and the Faculty of Fine Arts at the Complutense University of Madrid

GIMUPAI is a research group comprising teachers and researchers from the Faculty of Fine Arts (University Complutense of Madrid) and the Department of Social Psychology and Anthropology (Salamanca University) who have been working in art and health projects over the last thirteen years. Recently, we have carried out Tenemos cita con el arte, part of a national research project entitled "Art education in museums and other cultural institutions as a tool for increasing the wellbeing of people affected with Alzheimer" (Ministry of the Economy and Competitiveness-EDU2013-43253-R). The main objective of the program is to make the museum‘s artworks available to people with Alzheimer‘s and their caregivers, at the same time encouraging them to participate in artistic activities and artistic creation through art workshops. Tenemos cita con el arte has been designed as a program of visits of the Prado Museum and the Centro de Arte Reina Sofia Museum. The program also has included participation in workshops on visual arts and artistic creativity in the Faculty of Fine Arts. The program was undertaken between October and December 2015 with a group of 15 participants (Alzheimer‘s patients, caregivers, and other health and social workers)

Alibava : A portable readout system for silicon microstrip sensors

A portable readout system for silicon microstrip sensors is currently being developed. This system uses a front-end readout chip, which was developed for the LHC experiments. The system will be used to investigate the main properties of this type of sensors and their future applications. The system is divided in two parts: a daughter board and a mother board. The first one is a small board which contains two readout chips and has fan-ins and sensor support to interface the sensors. The last one is intended to process the analogue data that comes from the readout chips and from external trigger signals, to control the whole system and to communicate with a PC via USB. The core of this board is a FPGA that controls the readout chips, a 10 bit ADC, an integrated TDC and an USB controller. This board also contains the analogue electronics to process the data that comes from the readout chips. There is also provision for an external trigger input (e.g. scintillator trigger) and a 'synchronised' trigger output for pulsing an external excitation source (e.g. laser system)

Prototyping of petalets for the Phase-II Upgrade of the silicon strip tracking detector of the ATLAS Experiment

In the high luminosity era of the Large Hadron Collider, the HL-LHC, the instantaneous luminosity is expected to reach unprecedented values, resulting in about 200 proton-proton interactions in a typical bunch crossing. To cope with the resultant increase in occupancy, bandwidth and radiation damage, the ATLAS Inner Detector will be replaced by an all-silicon system, the Inner Tracker (ITk). The ITk consists of a silicon pixel and a strip detector and exploits the concept of modularity. Prototyping and testing of various strip detector components has been carried out. This paper presents the developments and results obtained with reduced-size structures equivalent to those foreseen to be used in the forward region of the silicon strip detector. Referred to as petalets, these structures are built around a composite sandwich with embedded cooling pipes and electrical tapes for routing the signals and power. Detector modules built using electronic flex boards and silicon strip sensors are glued on both the front and back side surfaces of the carbon structure. Details are given on the assembly, testing and evaluation of several petalets. Measurement results of both mechanical and electrical quantities are shown. Moreover, an outlook is given for improved prototyping plans for large structures.Comment: 22 pages for submission for Journal of Instrumentatio

The impact of a visual arts program on quality of life, communication, and well-being of people living with dementia: a mixed-methods longitudinal investigation

Background: Research reviews highlight methodological limitations and gaps in the evidence base for the arts in dementia care. In response, we developed a 12-week visual art program and evaluated the impact on people living with dementia through a mixed-methods longitudinal investigation. Methods: One hundred and twenty-five people living with mild to severe dementia were recruited across three research settings in England and Wales (residential care homes, a county hospital, and community venues). Quantitative and qualitative data on quality of life (QoL), communication and perceptions of the program were obtained through interviews and self-reports with participants and their carers. Eight domains of well-being were measured using a standardized observation tool, and data compared to an alternative activity with no art. Results: Across all sites, scores for the well-being domains of interest, attention, pleasure, self-esteem, negative affect, and sadness were significantly better in the art program than the alternative condition. Proxy-reported QoL significantly improved between baseline and 3-month follow-up, but no improvements in QoL were reported by the participants with dementia. This was contrasted by their qualitative accounts, which described a stimulating experience important for social connectedness, well-being, and inner-strength. Communication deteriorated between baseline and follow-up in the hospital setting, but improved in the residential care setting. Conclusions: The findings highlight the potential for creative aging within dementia care, the benefits of art activities and the influence of the environment. We encourage dementia care providers and arts and cultural services to work toward embedding art activities within routine care provision

Exploring the theoretical foundations of visual art programmes for people living with dementia

Despite the growing international innovations for visual arts interventions in dementia care, limited attention has been paid to their theoretical basis. In response, this paper explores how and why visual art interventions in dementia care influence changes in outcomes. The theory building process consists of a realist review of primary research on visual art programmes. This aims to uncover what works, for whom, how, why and in what circumstances. We undertook a qualitative exploration of stakeholder perspectives of art programmes, and then synthesised these two pieces of work alongside broader theory to produce a conceptual framework for intervention development, further research and practice. This suggests effective programmes are realised through essential attributes of two key conditions (provocative and stimulating aesthetic experience; dynamic and responsive artistic practice). These conditions are important for cognitive, social and individual responses, leading to benefits for people with early to more advanced dementia. This work represents a starting point at identifying theories of change for arts interventions, and for further research to critically examine, refine and strengthen the evidence base for the arts in dementia care. Understanding the theoretical basis of interventions is important for service development, evaluation and implementation